Suitable for existing homes & homes under construction.
4 Kits available to suit different types of applications.
Does the work of greater than 10 wind powered domestic ventilators.
12 months warranty on controller & fan motor.
HOW DOES IT WORK?
Econoflow utilises temperature differences in the air around your home to cool your roof cavity, in turn reducing temperatures within your home, energy costs to cool and increasing ducted air conditioning efficiency.
Econoflow requires no roof top penetrations.
Econoflow is installed internally within the roof cavity of your home, removing chances of leaks and other problems associated with roof penetrations.
Econoflow exhausts hot air from your roof & replaces it with cool air from under your household eaves.
Econoflow has a digital thermostat controller which can be installed in a convenient location within your home giving you control over roof space temperatures.
Econoflow uses a low 70watts of power to run a continuously rated AC fan with a high flow rate of 380 litres per second air flow.
WILL IT WORK ON YOUR HOME?
Econoflow requires a minimum 320mm eaves around the home.
Econoflow requires access to internal roof cavities.
Econoflow work most efficiently with a roof pitch of 22 degrees or greater but will still work with smaller pitches.
If your roof space is greater than 300m2, multi units may be required.
INSTALLATION
Econoflow components can be installed by any competent handyman.
Econoflow power & thermostat controller must be installed by a licensed electrician.
MANUFACTURING
300mm Industrial Ducted AC Fan Motor
Duct connections constructed in steel
Inlet & outlet vents constructed in powder coated aluminium
Inlets come with an internal mesh covering to minimise insects gaining access into the roof cavity.
RUNNING COST
Econoflow Ventilation system cost less than 0.03 $/hr at 30 C/KWH for domestic homes.
During winter the Econoflow system can be switched off or adjusted to allow for higher roof space temperatures to trap valuable solar energy (heat).