D R Distribution offers a range of heaters which are suitable for use in schools. To learn more about any of the products listed below, you can contact us HERE.
|SCHOOL HEATING PRODUCTS|
Air is drawn into the heater through the top grill by a tangential fan, past the thermostat, through the heating element and out the bottom grill creating a continuous cycle of warm air into the room. Once you have obtained the desired room temperature the thermostat will retain it. For further information please refer to PDF brochure below OR for professional information contact us HERE.
PureHeat High Mount is designed and built in Australia. Its unique non-dust attracting fan is controlled by an external switch, which activates on the first element. If the air drawn in by the fan is cold, an internal preset thermostat switches on a second element for efficient reliable warmth. For further information please refer to PDF brochure below OR for professional information contact us HERE.
The timerbox can be used for remote control of all Pureheat Highmount models. Simply turn the timer to any setting between 0 & 3 hours and the heater will operate for that time and automatically turn off. The overriding thermostat in the HM7B will cut power to the total Highmount system when the pre-set temperature is exceeded (approx. 24c), during operation on the economy element. (note: 4.5kw unit and multiple units equating to over 3.5kw require relay).
A 'paddle style' fan generates a continuous cycle of warm air. A two-stage thermostat that allows the elements to switch from high to low controls the air temperature. The standard 24 hour, programmable timer can be set, via its tabs. For further information please refer to PDF brochure below OR for professional information contact us HERE.
HEATSTRIP RADIANT HEATING
DRDTHS INDOOR HEATSTRIP
DRDTHE OUTDOOR / INDOOR HEATSTRIP
DRDTHH OUTDOOR / INDOOR HEATSTRIP
DRDTHX OUTDOOR / INDOOR HEATSTRIP
|RADIANT HEATER CONTROLLER
DRDTT-MTM2 provides both temperature control (allowing the user to turn the heat output up or down depending on the ambient temperature and conditions) and a timer for automatic heater shut-off operation. The timer function has four settings: 1 hour, 2 hours, 4 hours or constantly on. This feature is ideal for applications such as BBQ, alfresco areas, restaurant dining, assembly line production etc. when continuous heat is not required. The timer also reduces the likelihood of heaters being inadvertently left turned on. Depending on the ambient temperature there may be a requirement to control the heat output of the heater, the controller has 3 settings, they are High, Medium and Low. The controller allows a combination of the multiple timer (1/2/4 hour) and heat outputs (High/Medium/Low). The controller comes with a remote control unit which provides convenient control of the heater power output and timer functions. It is possible to use one wall controller to control multiple heaters. The wall controller is rated at 16 Amps and 240 volts. For a larger current draw, talk to your electrician who can use a relay to connect more units.
||OFF PEAK HEATERS
Many ranges and models are available to suit your heating needs. Works by storing heating during off peak times, for use during the day. It is heat when and where you want it at off peak rates. It is the cheapest form of heating available. For further information please refer to PDF brochure below OR for professional information contact us HERE.
VFMi Installation Instructions
Download TSF42K Brochure
TSF42K Installation Instructioins
Download FXLi Brochure
FXLi Installation Instructions